Kenco PH18000 Mechanical Pipe Hook
For Quotes, simply add desired products to your quote request with the Add to Quote button. You can view your full request at any time by selecting the View Current Quote Request button on the sidebar. If you need assistance please call us at (888) 240-7247 or email sales@ifindustrial.com
PH18000 MECHANICAL PIPE HOOK
The PH18000 Mechanical Pipe Hook has a 18,000 pound capacity. Simply attach your rigging, such as the Rigmax, to the lift eye and machine. The operator can use the manual slide located across the top of the hook to adjust the angle of the pipe for installation or removal.
The Pipe Hook is intended for use with 8' sections of concrete pipe. If setting longer sticks, consider a Pipe Lift.
Shipping Dimensions: 92" x 48" x 9"
Shipping Weight: 1150 lb
Specifications
- Capacity: 18,000 lb
- Min Inside Diameter: 15″
- RCP Pipe Length: 8'
Supporting Documents
Kenco Pipe Hook
The Kenco Pipe Hook is commonly referred to as a C hook and used for moving and installing reinforced concrete pipe (RCP) segments. Each model requires a minimum inside diameter and will pick a large range of pipe up to its rated capacity. The Pipe Hook is the attachment of choice for utility contractors tasked with setting heavy concrete pipe. It saves time and money on the jobsite.
SPECIALLY DESIGNED FOR REINFORCED CONCRETE PIPE
- PROTECTS BELL END OF PIPE
- HOME PIPE SAFELY AND EFFECTIVELY
- ADJUSTABLE ANGLE USING THE MECHANICAL SLIDE
LIFT ROUND OR ELLIPTICAL 8 FOOT PIPE JOINTS WITHOUT THE NEED FOR HYDRAULICS.
The Mechanical Pipe Hook was developed specifically for the utility contractor to provide a safe, efficient pipe handling attachment for horizontal lifting of precast concrete pipe.
MANUAL ANGLE ADJUSTMENT
The manual slide balance of the Kenco C hook uses an adjustable lifting eye to obtain the preferred balance point. Using this mechanism requires no hydraulics allowing the pipe to be set and angle best for the job at hand.
STANDARD AND CUSTOM MODELS
Standard models for these industrial pipe coat hooks are available for RCP from 10" ID and up. Each Pipe Hook is designed to handle a wide range of pipe. Custom sizes can also be fabricated for pipe longer than 8 feet and exceeding 60,000 lbs.
Similar C Clamp handling equipment is also available as a self-leveling pipe hook.
CERTIFIED PERFORMANCE
Kenco’s pipe handling equipment products are designed, manufactured and tested in compliance with the latest revisions of the ASME B30.20 and BTH-1 standards and are accepted by OSHA, CanOSHs, as well as virtually all other world wide standards.
All Kenco lifting products are hand tested by our engineering staff before it leaves our facility.
“This pipe lifter is absolutely amazing!! It is so much faster than using straps like usual and I also feel so much safer next to the heavy pipes being held in the air with this rather than a small nylon strap that could easily tear and send the pipe crashing into me. I have been in the labor union in NYC local 731 for almost 20 years and this is first company I have worked for that used this lifter. The company I work for is TLC hauling and we are doing a drainage job in Oceanside, Long Island. Thanks for the awesome lifter Kenco, it works great!!” - TLC Hauling
Pipe Hook in Use:
"We installed 84 inch – 25,000 pound elliptical pipe in record time… time improvements of 60% for a hook/set cycle." - Phoenix Construction (Florida)