Skip to content
Click Here to Contact Us for Assistance!
Click Here to Contact Us for Assistance!
Kenco MG6000 Rocklift Grapple

Kenco MG6000 Rocklift Grapple

by Kenco
$5,750.00 - $5,750.00
$5,750.00
$5,750.00 - $5,750.00
$5,750.00

Expected Shipping Time: 1-2 weeks

For Quotes, simply add desired products to your quote request with the Add to Quote button. You can view your full request at any time by selecting the View Current Quote Request button on the sidebar. If you need assistance please call us at (888) 240-7247 or email sales@ifindustrial.com

 

 

MG6000 ROCKLIFT GRAPPLE

The MG6K15T40V4 Rocklift will move irregular shapes such as rocks and boulders from 15 to 40 inches in diameter. The Rocklift is a triple tine mechanical grapple that requires no hydraulics to operate. The three serrated tines contacting the load allow for a very stable lift cycle every time. This triple tine rock lifting grapple also excels at picking up brush and debris, especially in hard to reach places such as deep ditches or ravines. Mechanical rock lifting tongs are an extremely versatile attachment that allows contractors the ability to make easy work out of otherwise difficult tasks. Height restrictions may apply to boulder lifters so be sure to check proper specs.

The larger MG12000 picks up 6 ton boulders. Check it out.

Shipping Dimensions: 52" x 48" x 68"
Shipping Weight: 400 lb

Specifications

  • Capacity: 6,000 lb
  • Grip Range: 15-40 in (diameter)
  • Height: 102 in

Supporting Documents

Product Manual

Spec Sheet

Kenco Rocklift

The Kenco Rocklift has three individual serrated tines that grip around large rocks, boulders, scrap or debris. The actuator is enclosed within the upper body of the lift and allows for each pick to occur without hydraulics. The action of relieving tension in the rigging locks and unlocks the actuator, allowing the tines to either lock open or unlock and grip as the operator lifts upward.

Never before has there been a safer and easier way to move large rocks than with the Kenco Rocklift. The Rocklift is a triple tine mechanical grapple that requires no hydraulics to operate. These rock lifting tongs are fully automatic and give the operator complete control to grip or release a load. The three serrated tines contacting the load on this boulder mover tool allow for a very stable lift cycle every time.

 

AUTOMATIC ACTION WITH NO HYDRAULICS

Once the operator lowers the rock into place, the stone grapple’s center tube can be lowered to engage the internally-housed actuator. Once this actuation occurs, the operator can begin lifting the Rocklift. As the tines become free, it will slide back to the default open position to allow for next lift cycle.

 

REMOVE BOULDERS AND DEBRIS

The Rocklift also excels at picking up brush and debris, especially in hard to reach places such as deep ditches or ravines. Rock lifting tongs are an extremely versatile attachment that allows contractors the ability to make easy work out of otherwise difficult task.

 

“We are rebuilding a stone retaining wall that failed along the side of a New York state highway. This rock pick has made our job go so much quicker that I can’t imagine doing it without it! It has been an integral piece of equipment on our job.” - Ticonderoga, NY

 

Rocklift Overview:

 

“We have been constructing a large rock wall and using your Rocklift gives us far more control placing these large rocks where we need them, making the process much faster and smoother. We have enjoyed using your equipment.” - Reale Construction

 

Kenco below the hook lifting products are designed, manufactured and tested in compliance with the latest revisions of the ASME B30.20 and BTH-1 standards and are accepted by OSHA, CanOSH, as well as virtually all other world wide standards. Patented under United States Patent No. 7673918B2.

All Kenco lifting products are hand tested by our engineering staff before they leave our facility.

 

EXPLORE KENCO


"Kenco supplies the construction industry with a wide selection of attachments to make your machine more productive and profitable. Our attachments are built with strength and durability in mind. After 30 years, we still remain the worldwide leader in below the hook lifting solutions. After 30 years, all of our heavy lifting attachments are still made with pride in the USA.

Kenco products have been field-proven time and again by our customers through increased productivity and profits with our excavator attachments, wheel loader attachments, dozer products and backhoe attachments. Others may try to imitate our lifting devices, but no other model can compete with the strength and durability that we build into each of our products.

Find pipe tongs, c hook, scissor lifts, Slab Crabs, and much more. We also offer a wide range of digging, demolition, and material handling attachments for excavators."